Javascript required
Skip to content Skip to sidebar Skip to footer

How to Make a Tie Car Seat Poncho

Jump to How-To

How to sew a car seat poncho with fleece fabric.

These car seat ponchosare easy to make and keep children warm in their car seats without sacrificing safety. Learn to sew a car seat coat.

This post contains affiliate links which may earn me commissions should you click through them and take certain actions. As an affiliate for Cricut, Amazon and other sites, I earn from qualifying purchases. Please DIY carefully. View my full legal disclosures here.

Please read the whole post so you don't miss any important information!

Been hearing a lot about car seat coats, or car seat ponchos? Here's everything you need to know about why you need one for your child, how to use them, and how to make one. If you don't have time to make one, buy one on Etsy from a small business!

Why Do I Need to Use a Car Seat Coat?

Winter parkas should NOT be used in car seats. In an accident, they can compress and the child can be ejected from the car seat. They are not safe. Here's some great information from Safe Ride 4 Kids about the safety issues with winter coats.

Winter coats are also difficult to buckle a 5 point harness over. And as the car heats, your child is not able to remove the coat to get more comfortable.

The solution to this problem is to use a car seat coat. It keeps kids warm while running errands. Your child can be strapped into their car seat underneath the poncho… which means they can easily get it on and off if they get hot (assuming they're old enough and agile enough to do so).

How to Use a Car Seat Poncho

Here's a Facebook video of how they work…

The car seat poncho goes over your child's head, but they're buckled in UNDER the poncho. This means they can take it on and off as needed.

It also means nothing is interfering with the function/strength of the car seat straps.

Sizes

Car Seat Ponchos for Babies

If your baby is still in an infant seat, then I would be hesitant to use a car seat poncho. You could certainly adjust the length and size of the neckline, but I think a cover like this for a bucket seat makes a lot more sense. Alternatively, you can just tuck a blanket around your baby. I like those covers because they keep the fabric away from the baby's face.

If you make one for a baby, just make sure to adjust the size down so the baby doesn't end up with fabric over their face. I would probably leave off the hood too. You just want to be cautious about baby overheating or suffocating.

I prefer to use the car seat poncho once my child has more mobility.

Car Seat Ponchos for Toddlers and Kids

These ponchos are very easy to make and you can adjust the length for the height of your child.

The 23″ length worked fairly well for my sons from age 1 through age 6. It was pretty long on him at 1 years old, but we carried him everywhere so it wasn't a problem. I liked the long length at that age because I could wrap him up warm when we went outside.

DIY Car Seat Poncho that fit(ish) from 1-6 years old.

That said, you could make one every year or two that is the perfect length for your child. You just cut the circle to the length you want the poncho to fall to (ie. measure to knee and use that number- if it's 15″ then you cut to 15″ instead of 23″).

By 2 years old, it's nice if it's not too long for them to walk in.

We always have a parka and snow bibs for snow play at home, but these ponchos are PERFECT for errands. If you want your child to use this as a play coat too, you can add arm openings to the poncho.

Here's a few products in my store that you might enjoy! Keep scrolling for the poncho tutorial!

  • SVG "Please Excuse the Mess" on a sign.

    Please Excuse the Mess SVG

    $1.99

  • Craft Cart Woodworking Plans

    $4.99

  • Zippered Square Lunch Box PDF Pattern

    $4.99

DIY Kids Carseat Poncho

Supplies

  • Fleece. You'll want an inner fabric and an exterior fabric (if you live in a warmer climate, you could probably use just one layer). I could have used 1.5 yards easily for this, but I'd bought 2 yards to be safe. The fabric I used for the Star Wars poncho can be found on Fabric.com.
  • Bias tape: Expect to use about 4-5 yards
  • Sewing machine
  • Pins or clips
  • Sewing scissors
  • Measuring tape
  • Optional: Rotary cutter and cutting mat
  • Car seat poncho pattern, free for subscribers (you'll be directed to the pattern once you click 'confirm' for your subscription)
  • Optional: Snaps and snap pliers for the neck

Make sure to check out our sewing app, Sew Organized,
available FREE for the Android and Apple.

Sewing a Car Seat Poncho with Hood

For this tutorial, you need to use two layers of fleece. If you're in an area with warmer winters, you could probably do only one layer. It will change how you sew your poncho slightly, but it won't be a problem.

Start by folding your fleece fabric in half- twice.

Measure your child from their neck down to the area you want your poncho to end. If it's their knees, measure to that point. If it's to their hips, measure to that. This is a matter of personal preference.

I used 23″. From the corner of your fabric where all four corners are folded, measure out your 23″ (or whatever) and mark all along the curve.

Pinning the fleece fabric from the double folded corner at the 23" mark.

Cut along these markings (connect the dots) using scissors or this nifty rotary cutter (the pizza cutter thing).

Cutting along marks.

You'll do the same for your interior fabric. As you can see above, I cut both fabrics at the same time, making my scissors very angry at me.

Once you've cut that, you want to cut your opening for the hood. I used a CD/DVD as my template. From the same corner as before, you'll want to use a QUARTER of your CD as the area to cut.

Cutting the neck for the poncho.

Now you'll want to cut out the fabric for your hood in both fabrics. You need two cuts of the pattern per fabric (interior and exterior).

Sew your interior hood pieces together and sew your exterior hood pieces together, sewing along the curve for the back and top of the hood. You'll leave the front of the hood and the bottom of the hood open.

Adding the hood for the car seat poncho.

This is how I managed the hood the first few ponchos… pinning the finished hood pieces to the poncho and sewing on, then doing some crazy flipping of the poncho.

Here's a bigger photo from the 'Game on' poncho.

Pinning on the hood to the poncho.

I recommend watching the video at the bottom if you want to do it this way. It's complicated.

Two Alternative Ways to Attach the Hood

If you don't 'get' the other hood method, these two options should be easier.

For both options, start by pinning your exterior hood fabric to your exterior poncho, right sides together. Sew.  Repeat with your interior fabrics.  This sort of creates two one layer ponchos.

Method 1: Face your two ponchos right sides together. Sew the hoods and neck area together. Leave a small area to turn and top stitch.  Turn and top stitch your hood/neck area.

Method 2: Face your two ponchos wrong sides together, just like they'll be once finished. Sew bias tape along the raw edges of the hood and neckline.

At this point, the bottom of your poncho needs to be finish. This is what it looks like…

Bottom of the car seat poncho, before adding bias tape.

Sew your bias tape to finish the bottom edges of the poncho or you can just snip strips at the bottom of the fabric and tie them together for a fringe look.

Sewing bias tape on the bottom of the car seat poncho.

Adding a Snap for the Neck of the Poncho

If you want the neck to be more snug than mine is, you can add a snap or two. You can learn how to install snaps like a pro here, but here's a photo of the snaps I added. I added one additional snap for if I wanted the neck even tighter after I took this photo because I wanted the option to make it tighter or looser.

With the newer pattern adjustments, you may not need to add this, but I did because I cut my original neck too wide when I made the Star Wars version of the poncho. Of all three ponchos I've made, the Star Wars one is my favorite.

Adding a snap to help keep the neck of a car seat poncho closed.

Here is my oldest son wearing the poncho in his car seat. He's all buckled in underneath…

This is how the car seat poncho is worn in the car seat. The buckles are attached UNDER the coat.

Can I make a No Sew Car Seat Poncho?

I have seen this question being asked a lot. I think it's feasible to make a no sew car seat poncho if you leave off the hood. You can use a separate hat instead of a hood.

The benefit to fleece is that it won't fray when washed… and you may not need to wash this a lot regardless. As a result, you can leave raw edges unlike if you were working with flannel or cotton fabric.

While I haven't attempted to do a no sew version, here are three options.

Option 1: Heat N Bond

I would cut the two layers of fleece the same way, but make the neck area smaller. You can always make it bigger if needed. Once cut, try it on your child to make sure the neck can fit over the child's head (without it stretching).

You could attach the two layers of fleece wrong sides together around the neckline using double sided hem tape. Then you can use either the tying method or hem tape to keep the bottom hem together.

Option 2: Fabric Glue

Use the same method as above to cut your fabric. Instead of hem tape, try to adhere the neck layers using fabric glue. You can try the same for the bottom of the poncho, or use the tying method along the bottom.

Option 3: Tying and Braiding the Fleece

I haven't tried this, but I am BETTING this might work AND look nice. You could try braiding the neckline.

To do this, DO NOT cut the full neck out. I would draw where the neckline would be on your fabric using tailor's chalk.

Snip off the tip of your corner instead of cutting to the neck.

Open up your poncho. Cut 2″ wide strips from your opening to the line you drew for your neckline. Repeat for both layers.

Then follow this process to braid the neck line. I think you can braid both layers together this way at the same time.

You can braid the bottom hem too or tie the edges.

Again- I haven't tried this and you probably want a good 2″ to work with to do the braiding method. But I think it would look pretty!

Car Seat Coats for Warmer Weather

One of the things I've been emailed about a few times is selecting fabric for warmer weather. Some people would like a transition, light weight car seat coat for those 45-70 degree days.

My kids would happily go naked in 60 degree weather so I haven't made a lighter weight coat, but I'll give you my advice here.

I would go with a single layer fleece. You can finish all of the edges with bias tape. It would be easy to do and be similar to those zippered fleece coats most kids wear for warmer cold days.

If you're dying to try something new, consider what your regular jackets use. Wool would be an interesting choice or something waterproof such as what you would use for a rain jacket. Just consider comfort and whether the fabric would drape well for this particular pattern.

Video Tutorial for Sewing a Car Seat Coat

Note: Measurement I used for the length of my poncho was 23″… my video has instructions on how to adjust if needed, but this measurement has worked well for my kids.

This project was inspired by: Reversible Car Seat Poncho Tutorial.

Download the Free Car Seat Poncho Pattern

You really don't need a pattern, but I had someone draw up a pattern if you're more comfortable with a full pattern to follow. You still need to fold your fabric twice for the main poncho and trace the pattern from the double fold corner.

The person who drew this up added some extra seam allowance so it's going to be a bit bigger than my original ponchos. The hood is also different from the original.

Save a tree and only print the pages with the hood (5, 6, 10, 11). You'll enter your email to subscribe, then you'll receive a confirmation email to confirm your subscription. The link is included in that email! Make sure to check your spam folder if you don't see the email.

Learn how to Add Arm Openings to Your Car Seat Poncho Here

Make sure to check out my other projects for kids. You can learn how to make a Nerf Vest with old Camo, how to sew a toy car carrier, or make an easy ironing station for your sewing area.

Can't Sew? Support Small Businesses and Buy a Poncho on Etsy

If you aren't sure you'll have the time to finish a poncho before the cold sets in, consider supporting a small business on Etsy.

Please pin and share this post!

Sew an easy car seat poncho to keep your child safe and warm in the car!

DIY Car Seat Poncho

Prep Time: 15 minutes

Active Time: 1 hour

Total Time: 1 hour 15 minutes

Difficulty: Intermediate

Learn to sew a car seat poncho and keep children warm in their car seats without sacrificing safety.

Materials

  • Fleece - 2 Yards for inner fabric and exterior fabric
  • Bias tape:  4-5 yards
  • Pins or clips
  • Car seat poncho pattern
  • Optional: Snaps and snap pliers for the neck

Tools

  • Sewing scissors
  • Measuring tape
  • Rotary cutter and cutting mat
  • Sewing machine

Instructions

      1. Fold your fleece fabric in half- twice
      2. Measure your child from their neck down to the area you want your poncho to end.
      3. Cut along these markings using scissors or a rotary cutter.
      4. Repeat for the interior fabric.
      5. Cut the opening for your hood.
      6. Cut out the fabric for your hood in both fabrics.
      7. Sew your interior hood pieces together
      8. Sew your exterior hood pieces together, sewing along the curve for the back and top of the hood.
      9. Leave the front of the hood and the bottom of the hood open.
      10. Sew your bias tape to finish the bottom edges of the poncho.

Car Seat Poncho Google Web Story

How to Make a Tie Car Seat Poncho

Source: https://diydanielle.com/diy-carseat-poncho/